View Single Post
Old 05-15-2001, 10:16 PM
rudy rudy is offline
Registered User
Join Date: May 1999
Location: New Location: VA Palo Alto HEALTH CARE SERVICES
Posts: 109
rick, ..try flushing out your cooling system too. Use a degreaser and citric acic flush just to ensure that the system is free from contamination and other solid particles that could damage your new pump seals. Ensure that upon completion,....use a 50/50 coolant/water mix and bleed the system good. Also, ..I strongly recommend that you replace your T-stat with 80 degree set point,..your system should be up to par. Hope this helps....
Reply With Quote