Hello everyone - I'm installing a built in radar unit in my 1996 c220, and im wondering if anyone knows a convinient location to tap into ignition switched +12V. Preferably some wire in the passenger's side footwell, in the wiring channel. This unit draws a very small amount of current, so i dont think adding it to an existing circuit should be any sort of issue. I didnt want to randomly go into any harness and start testing wires, except as a last resort. So hopefully someone who has already done this, or has a wiring diagram can help me out.
Best wishes and thanks once again for your help,
George Androulakis
|