View Single Post
Old 05-20-2001, 05:20 AM
merc380sel merc380sel is offline
Registered User
Join Date: Mar 2001
Location: Sydney Australia
Posts: 23
Originally posted by stevebfl
I doubt that the problem is in the trans. The car shouldn't idle that high ever. I believe the problem is in the idle system.

On that system it usually is a bad controller. It also is usually just bad solder contacts inside it. Sometimes they go bad because the idle valve itself has shorted. Rebuilt controllers come with instructions to test the ohm value of the idle valves. There are two designs with different values. I don't remember the values but they are probably around 10 ohms. (I think one is higher and one lower, since you aren't trying to verify model just making sure the value is above zero may be enough).

The throttle switch must be closed for idle control to work, so verify it electrically. It is buried so you will have to find the three wire connector at the top front of the motor to evaluate.
Reply With Quote