View Single Post
Old 05-21-2001, 02:47 PM
rudy rudy is offline
Registered User
Join Date: May 1999
Location: New Location: VA Palo Alto HEALTH CARE SERVICES
Posts: 109
I had this situation sometime ago, ...the rear is too low and the rear tires is not straight enough and had always wear in the insider. Your right, ..there's no adjustment on the camber itself. I measure the rear height elevation and from there, ..I based me decision on what size (thickness) of spring pads that I have to use. I install the one with a three star (19MM), ...the ride height was corrected, same as the camber. Hope this helps......
Please check if your control arm bushing is okay.....
Also, ..make sure there's not much weight inside the trunk.
Reply With Quote