View Single Post
Old 05-24-2001, 09:57 AM
Posts: n/a
Help interpreting data:

I went to the DIY section and consulted my PM CD reagrding testing air/fuel mixture with a multimeter. I got results that aren't what I expected.

With the O2 sensor disconnected, it started out at 6.5V and the temp indicator on the instrument panel indicated typical operating temperature. After idling for several minutes, I noticed that the ranges were increasing so I unplugged the sensor again and the voltage had risen to 6.92V. The PM cd says it should measure 2.1-4.8V.

With the sensor connected, the voltage did oscillate. The range was +1.3V to +1.7V from the 6.92V baseline with the sensor disconnected.
Reply With Quote