Thread: A/C Compressor
View Single Post
Old 05-27-2001, 10:30 AM
rudy rudy is offline
Registered User
Join Date: May 1999
Location: New Location: VA Palo Alto HEALTH CARE SERVICES
Posts: 109
Johnny, ....get some "easy out", ...measure the tip size, ...get a drill bit close to the size of the easy out tip. Center punch the bolt, ...make sure it's the center. Drill a 1/4 deep hole in the bolt, ....put the easy out in it, ..tap it to make sure it has a tight fit. Turn the easy out counter-clockwise slowly and feel if it is getting loose. Tap it again to ensure a tight fit, ..spray some WD or penetrating oil to lubricate it. Continue doing this until you finally get the broken bolt out. If you're only close to me,...I'll do it for you.
Reply With Quote