hi Mike to remove the steering wheel ia a snap,but u do neeed a long t25 or 27 torx.,if you have the tool,first and this is important,turn the steering wheel in such a place that you can insert the torx into the rear of the steering wheel one on on the left and one on the right.if you can get to either hope ,take out the KEY .Now you can insert the torx into the holes and unscrew the bolts.After they are loose pull the air bag gentelu out and remove the electrical connector from behind.and that is it.the only thing now is that u can not turn the ignition on because if you do the vehicle will have a air bag code in the instrument cluster.So just to be sure and you have your radio code disconect the battery first before you do anything.and than you will not have any trouble at all.and when removing the steering wheel ,mark the shaft to the wheel so u put it back at the same spot when reinstaling