Quote:
Originally Posted by RES
That is one of the plastic sparkplug connectors, I am trying to remove to get at my sparkplugs on my 1995 C220. When I remove the metal access panel on top of the valve cover aluminum casting the upper portion of that connector is visible with the wires coming out of it. When I try pulling on that connector with a considerable amount of force, it will not pull off of the plug. I don't want to break it ($18 apiece).
|
I recently replaced three of those on my 1993 300E2.8 - they just pulled out.
They did take a bit of force, but mine just pulled out with a very satisfying 'slurp-pop' noise (best way to describe it, I'm afraid).
I'll go ahead and ditto Kestas' comment about the dielectric grease and the anti-sieze compound - inexpensive to buy, and a real timesaver later on.