Quote:
|
Originally Posted by sbourg
Haven't done this with ours, but.... why would the intake manifold have to come off?
Steve
|
The lifters are in the block UNDER the intake manifold....the ride directly on the cam which is dead center in the block. You can replace pushrods without the intake coming off but not the lifters.
http://www.morethanjustpower.com/category.asp?id=6
little holes towards the center are where the 16 lifters fit....the intake manifold covers the lifter galley when its on the engine.
__________________
Proud owner of ....
1971 280SE W108
1979 300SD W116
1983 300D W123
1975 Ironhead Sportster chopper
1987 GMC 3/4 ton 4X4 Diesel
1989 Honda Civic (Heavily modified)
---------------------
Section 609 MVAC Certified
---------------------
"He who fights with monsters might take care lest he thereby become a monster. And if you gaze for long into an abyss, the abyss gazes also into you." - Friedrich Nietzsche
|