View Single Post
Old 08-05-2005, 03:34 AM
sixto's Avatar
sixto sixto is offline
smoke gets in your eyes
Join Date: Jun 2000
Location: SF Bay Area
Posts: 20,793
To remove the belt, undo the bolt holding the upper end of the shock to the head. Remove the nut holding the upper spring anchor to the head. You might have to hold the bolt head at the far end. Put a tire iron in the upper spring anchor and tilt it CCW so you can pull the bolt back enough to clear the upper spring achor. Then tilt it CW to unhook the spring. You should be able to slide the belt off the tensioner pulley.

95 S420
87 300SDL
Attached Thumbnails
SDL guys, more help please!-603belt.jpg  
Reply With Quote