View Single Post
  #3  
Old 06-06-2001, 04:48 PM
Primo
Guest
 
Posts: n/a
Possible simple fix. It might be that the wiper blade frame is worn out. I'm talking about the thing that the rubber wiper insert goes into. It has a series of pivot pins which help the wiper contact the glass through the entire length of the insert. These over time wear out with the repeated back and forth motion of the wiper motor. To test the blade, take it off of the arm, hold it by the center mount and shake it. If it rattles, the pivot pins are worn out. Go get a whole new blade(not the arm) and this should take care of the noise.
Reply With Quote