View Single Post
  #4  
Old 08-15-2005, 12:08 PM
mctwin2kman mctwin2kman is offline
Registered User
 
Join Date: Jul 2004
Location: York, PA
Posts: 621
Measure from the center pin on one end to the center pin on the other. Proper spec range is 800 Ohm to 1.3KOhm according to MB. Use non resistor copper plugs only. Rotor resistance from center to tip is also 1KOhm. As is each tip in the cap.

Wires from cap to coil has no resistance.
__________________
~Jamie
_________________
2003 Pewter C230K SC C1, C4, C5, C7, heated seats, CD Changer, and 6 Speed. ContiExtremes on the C7's.

1986 190E 2.3 Black, Auto, Mods to come soon.....
Reply With Quote