it is a high speed surge,the car has 150K.
I haven┤t changed cap/rotor.
The guides and the seals have not been done any work on.
I have however checked the rotor/cap and they look okay but i think i will change them anyway.
I had some trouble with the coil and the wire from it to the cap but i have changed them.(misfired)
There are some tapping sound from a bad lifter that comes and goes.
I recently have done an emmission test that was okay.
The high rpm range is not used frequently.
The oil change is done every 6K and i have to fill from low to high after about 3-4K.
Pelle 300E 4M -89