View Single Post
  #8  
Old 09-13-2005, 02:21 PM
ecoshadow ecoshadow is offline
Registered User
 
Join Date: Sep 2005
Location: Virginia Beach VA
Posts: 17
These forums helped me to clean out the pressure line from the back of the intake manifold to the little plastic turb overboost protection valve on the firewall and the plastic line from that valve to the ALDA. Very easy to do with a 12mm open end wrench, a can of brake parts cleaner and some air pressure. Took about 10min. Major improvement in low end acceleration. Lots of discussion of the problem in these forums under adjusting the ALDA.
Good luck!
Reply With Quote