Now that you have the tranny out you might as well replace the front pump bushing, if it's a bushing rather than a bearing. In talking to several rebuilders before I rebuilt mine, the one consistent piece of advice I got was to replace that bushing. They said if you didn't, the front seal would start leaking soon after. Sure enough, the 2 trans I disassembled had that bushing pretty well worn. A new one cost me $11. Press old one out, new one in.
__________________
'82 300SD - 361K mi - "Blue"
"Good judgement comes from experience. Experience comes from bad judgement."
listen, look, .........and duck.
|