Thread: Half Shafts
View Single Post
  #6  
Old 06-22-2001, 10:34 AM
aldedmon's Avatar
aldedmon aldedmon is offline
Senior Member
 
Join Date: Mar 2001
Location: Houston
Posts: 809
Done

Thanks for all who contributed.
Actually it was the only the spindle that I needed to remove.
I first tried a "2 Jaw " puller to no avail, but was able to get it out with the use of (GASP!) an air hammer. The vidrating affect of the tool backed the spindle out very VERY easily.(less than 10 secs per side)
__________________
Regards,

Albert
aldedmon@yahoo.com
Reply With Quote