Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion > Alternative Fuels

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-21-2005, 12:42 PM
arcticathlon's Avatar
Registered User
 
Join Date: Aug 2005
Location: Richmond, Tx
Posts: 1,129
Just finished my WVO filter system

Well i just finished it. it is my v1.0, but later i will build something larger. I can filter 5 gallons at a time and it takes around 15min. the cone filter is a 25u, then i have 2 filters inside each other that are 10u and 1u. i just pump settled wvo from my 55gallon barrel into a cube and set it on the top and leave. 15 mins later it is empty and ready for 5 more gallons. the clean wvo just drips in the steel barrel below, that i close up with a lock lid.

i live in an appartment, and have no room for storage other than my trailer. i would have done a 55g drum above another drum design, but i cant store it anywhere.


Benz is running great on the Blend (90%/10%/cetane boost/Fuel Stabilizer) and is running much quieter. at what mileage did everyone who went bio or WVO get the cloged fuel filters? i am at 90 miles so far.

Attached Thumbnails
Just finished my WVO filter system-filter.jpg   Just finished my WVO filter system-filter-2-.jpg   Just finished my WVO filter system-filter-1-.jpg  
__________________

Grey '91 350SDL 214k Dad's car
Beige '81 240D 4 Speed 254k SOLD
Blue '82 300D 225k SOLD
White '95 E300D 46k SOLD
Blue '87 190D 2.5 Turbo 315k SOLD
Brown '80 240D 4 Speed 716k SOLD
Beige '80 300D N/A 119k SOLD
Blue '85 300D Model 186k T-Boned
Reply With Quote
  #2  
Old 10-21-2005, 12:54 PM
Registered User
 
Join Date: Jun 2005
Location: NJ
Posts: 1,182
Looks good.

I am at v20 or so.
55 gal barrell w/ 4 6" holes thru which I place 7" ringed filters. The 4 filters hold about 3 gallons so I can empty a cube at a time. I have 3 of these barrels. I filtered 50 gallons of 2 week settled oil in 30 minutes last night.
__________________
82 300D....went to MB heaven
90 350 SDL....excercising con rods
Reply With Quote
  #3  
Old 10-21-2005, 01:05 PM
Registered User
 
Join Date: Jul 2004
Location: Norwich, VT USA
Posts: 905
Very cool. I sometimes get sloppy so if it were me I would paint, poly, or varnish the wood so it doesn't absorb oil.
__________________
Rob M
Norwich, VT USA
1980 240D Euro delivery 4 speed manual silver/blue
~160K miles
Reply With Quote
  #4  
Old 10-21-2005, 01:38 PM
Austin85's Avatar
Smells like Diesel..
 
Join Date: Jun 2005
Location: Rio Ancho, Dibulla Colombia
Posts: 2,726
Question articath

What in the world is a 25 u filter ???What is "u"? I've heard of micron , but u????

btw nice set up...

and can u explain your blend.....again....90% WVO/and 10% cetane boost????

and where are you and are you heating in the car at all????
__________________
'87 924S
'81 280SEL

Sold ->

81 300SD -
93 300E w/ 3.2
85 300D-
79 300SD
82 300CD
83 300CD - CA
87 190E 5 spd
87 Porsche 924S

"..I'll take a simple "C" to "G" and feel brand new about it..."

Reply With Quote
  #5  
Old 10-21-2005, 01:51 PM
Nate Stanley's Avatar
Registered User
 
Join Date: Jul 2000
Location: Watsonville, Ca
Posts: 399
90 miles. Hmmm. Young you are and much have you to learn before..

.. a WVO Jedi can you be.


Actually, a nice, clean setup given your limited space requirements. Nice oil, too.

One caution, though---I thought I had this whipped too at 90 miles, but you will likely hit the wall around 1K as the WVO starts knocking loose any possble accumulated goo that's in your tank.

If you haven't flushed the tank, you may need to later. Put some clear tubing anyplace you can to observe the dynamics of the system until the bugs are worked out.

Be watchful for the classic air bubbles in the system. This is air responding to any leaks that will be revealed due to the increased friction of the heavier WVO blend.

Replace all rubber hoses, use quality band-type hose clamps and expect filters to begin loading up.

Carry extra filters and wrenches to change on the road.

If your old style primer pump handle (which you will probably use more often than you think for the next few weeks) snaps back to the down position when you let go of it, and if your primary filter has run dry, this is proof that you tank strainer is loading up. Pull the gas cap and reverse flush the lines with compressed air if this occurs, and it will buy you more time.

Once you get thru this phase, you will be able to really enjoy the benefits of WVO use.

I know because I'm not there yet- the tank gets flushed this weekend.

Regards,
__________________
Nate Stanley
(Currently Benzless)
1985 F-250 6.9l 170K
2009 SCION XB 36.5K
2003 LS430 78K
2012 Kubota B 2320
Reply With Quote
  #6  
Old 10-21-2005, 02:04 PM
Stressed Member
 
Join Date: May 2004
Location: Florida Big Bend region
Posts: 721
Quote:
Originally Posted by Austin85
What in the world is a 25 u filter ???What is "u"? I've heard of micron , but u????
The Greek letter µ (mu) is sometimes used as the symbol for "micron", which is a micrometer (one millionth of a meter). I think that the use of "micron" for this has not been officially encouraged for several decades, but it's still in common use.

One also may sometime hear "micron" used as a unit of pressure measurement, as in, "this vacuum pump pulls to 10 microns or better". There, it means "10 micrometers of mercury". That usage is also no longer officially encouraged.
Reply With Quote
  #7  
Old 10-21-2005, 02:23 PM
arcticathlon's Avatar
Registered User
 
Join Date: Aug 2005
Location: Richmond, Tx
Posts: 1,129
i was just being lazy and used the "u" for "µ". also i forgot the RUG in that 10%. it is 90% wvo/10% RUG/cetane/ and fuel stabilizer.

i have 3 sets of fuel filters in my trunk with the wrenches to swap them out incase of me getting stuck somewhere.

andmoon great idea. i might build my 2.0 now. just have 4 filters like you said, and then maybe i can make another 55 drum above it that i could pump my oil into. should speed up things quite a bit.

at what mileage did other WVO start having plugged filters.
Nate Stanley said 1k, i heard 200 miles, or until you feel like you have no power. (or she wont start )

will make more fuel this weekend.
__________________

Grey '91 350SDL 214k Dad's car
Beige '81 240D 4 Speed 254k SOLD
Blue '82 300D 225k SOLD
White '95 E300D 46k SOLD
Blue '87 190D 2.5 Turbo 315k SOLD
Brown '80 240D 4 Speed 716k SOLD
Beige '80 300D N/A 119k SOLD
Blue '85 300D Model 186k T-Boned
Reply With Quote
  #8  
Old 10-21-2005, 02:24 PM
dannym's Avatar
I'm not here
 
Join Date: Oct 2004
Location: Deltona, Florida
Posts: 2,360
WOW......that's awesome!
I've been thinking of a way to do this in limited space and that's it!

What do you do with the stuff that's left in the drum after you let it settle?
Also, where do you get the filters? Do you have a part number?

Danny
__________________
1984 300SD Turbo Diesel 150,000 miles

OBK member #23

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination
Reply With Quote
  #9  
Old 10-21-2005, 02:33 PM
arcticathlon's Avatar
Registered User
 
Join Date: Aug 2005
Location: Richmond, Tx
Posts: 1,129
well i have not had to empty any messy barrels yet (not looking forward to it, read enough on those experiences). might sound stupid but unless i find some wood somewhere and cut it to pieces. i wont be able to mix it with sawdust. i am in a small college town, and i live in a small appartment. i was going to try and make some burning blocks, but i have no use for them. i dont know if i could sell them, and to whom. and i really dont think it would be advized to dump it in the storm drains. seems illegal. i am thinking of just going back to the restaurants that i got the oil from and dumping my crud in their big tank. it is half full of junk, and i am technically giving them free oil
__________________

Grey '91 350SDL 214k Dad's car
Beige '81 240D 4 Speed 254k SOLD
Blue '82 300D 225k SOLD
White '95 E300D 46k SOLD
Blue '87 190D 2.5 Turbo 315k SOLD
Brown '80 240D 4 Speed 716k SOLD
Beige '80 300D N/A 119k SOLD
Blue '85 300D Model 186k T-Boned
Reply With Quote
  #10  
Old 10-21-2005, 02:54 PM
Registered User
 
Join Date: Jun 2005
Location: NJ
Posts: 1,182
Forgot to mention that you need to sit and watch the filtering as a clogged/clogging filter will not let the oil pass at a rate to keep up with the supply....which leads me to my V3 or 4..which was an attempt to vacuum up dirty oil at the rate of new filtered oil...which lead to v9 or 10 which was a pump pushing oil thru a pressurized filter housing (worked/works great but still slower than gravity feeding and uses electricity).....All roads end with as much surface area filtering as posible (sock filters) into as large a container as manuverable (55 gal barrels on dolleys/wheels) 33 gallon 'BRUTE" garbage cans on coasters and airtight lids are nice too.
__________________
82 300D....went to MB heaven
90 350 SDL....excercising con rods
Reply With Quote
  #11  
Old 10-21-2005, 08:53 PM
Diesel Dad
 
Join Date: Sep 2005
Location: Santa Cruz, CA
Posts: 48
Filter supply?

Where did you buy those filters? They look like giant coffee filters...

Great picks, thanks.

--Hugh
__________________
1985 300TD 190k

1991 F-250 7.3L diesel 150K
Reply With Quote
  #12  
Old 10-21-2005, 09:10 PM
arcticathlon's Avatar
Registered User
 
Join Date: Aug 2005
Location: Richmond, Tx
Posts: 1,129
those are just paper cone filters from frier sites on the net. payed like 6.35 for a 50pack and the holder was 7.95. it works really well.
__________________

Grey '91 350SDL 214k Dad's car
Beige '81 240D 4 Speed 254k SOLD
Blue '82 300D 225k SOLD
White '95 E300D 46k SOLD
Blue '87 190D 2.5 Turbo 315k SOLD
Brown '80 240D 4 Speed 716k SOLD
Beige '80 300D N/A 119k SOLD
Blue '85 300D Model 186k T-Boned
Reply With Quote
  #13  
Old 10-21-2005, 09:18 PM
whunter's Avatar
Moderator
 
Join Date: Dec 2003
Location: Metro Detroit, Michigan
Posts: 17,416
Thumbs up I say it is official

Quote:
Originally Posted by eskimo
The Greek letter µ (mu) is sometimes used as the symbol for "micron", which is a micrometer (one millionth of a meter). I think that the use of "micron" for this has not been officially encouraged for several decades, but it's still in common use.

One also may sometime hear "micron" used as a unit of pressure measurement, as in, "this vacuum pump pulls to 10 microns or better". There, it means "10 micrometers of mercury". That usage is also no longer officially encouraged.
Ignore the idiots that try to revise everything just because it is old.
Reject their revisions...
I reject pop science, pop culture and political correctness.
__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/
Reply With Quote
  #14  
Old 10-21-2005, 11:22 PM
Diesel Dad
 
Join Date: Sep 2005
Location: Santa Cruz, CA
Posts: 48
Filter sites?

I found http://www.acemart.com/merchant.mv?Screen=PROD&cm_ven=CJ&Product_Code=ROYSFC10&cm_pla=10368534&cm_ite=ROYSFC10&cm_cat=16436 51

but it is tough to find out what type mesh of filter it is.

What would be good? 20 micron? 50? I need this to filter before brewing bio-diesel and then straight WVO later.

--Hugh
__________________
1985 300TD 190k

1991 F-250 7.3L diesel 150K
Reply With Quote
  #15  
Old 10-22-2005, 01:48 AM
arcticathlon's Avatar
Registered User
 
Join Date: Aug 2005
Location: Richmond, Tx
Posts: 1,129
those are what i have too. they are supposedly around 25 micron.

__________________

Grey '91 350SDL 214k Dad's car
Beige '81 240D 4 Speed 254k SOLD
Blue '82 300D 225k SOLD
White '95 E300D 46k SOLD
Blue '87 190D 2.5 Turbo 315k SOLD
Brown '80 240D 4 Speed 716k SOLD
Beige '80 300D N/A 119k SOLD
Blue '85 300D Model 186k T-Boned
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 06:19 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page