Where is the best line to heat my WVO?
 

I want to use a coolant line to heat up my WVO blend for the "winter".
Can someone point out in a pic if possible; where the coolant line is on a 300D that has the hottest coolant going through it. I would use that to heat my fuel lines.
Thanks, aa

on my 603 engine the hottest point is the coolant line that runs from the back drivers side of the block and goes into the firewall. This is where the heated coolant passes from the engine to the heater core. Thats where I tapped in for my Frybrid system. For the return look on the other side of the firewall on the passenger side.

Zack

Do a search and Im positive you'll find the answer in many threads

OK do you have a pic of this? or I could just look in the AM......I would want to know how accessable it is ...

There are only 2 coolant lines at the firewall you will see it;)

I did a search
 

I found this pic

http://biodiesel.infopop.cc/groupee_files/attachments/6/2/0/620101362/620101362_Fatmobile_Coolant_Tee2.JPG?ts=4387EA9F&key=60D743AB8D94B61D5C3F1D6364FAD7A2&referrer=http% 3A%2F%2Fbiodiesel.infopop.cc%2Fgroupee%2Fforums%2Fa%2Fga%2Ful%2F899109607%2FFatmobile_Coolant_Tee2.J PG

on an older post and it looks like what you are describing...correct?

I just don't see where he runs off to heat his fuel lines...???????