Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help



Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Diesel Discussion > Alternative Fuels

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-17-2010, 02:50 PM
Diesel Dan's Avatar
Registered User
 
Join Date: May 2006
Location: Austin, TX
Posts: 264
Biodiesel is eating the fuel supply hose from my tank!

For those who use biodiesel, what have you done about replacing the short length of hose that comes out of the fuel tank? It has a fitting on one end that screws into the fuel strainer, and the replacement part from Mercedes is not biodiesel compatible. I believe that my hose is getting eaten from the inside out as evidenced by constant clogging of my prefilter with black specks that I do not think are fungus.

Does anyone know what thread size and pitch the fuel tank strainer has on the bottom where the fuel supply hose screws in? I may need to reduce and convert this down to 1/8" NPT so I can put a hose barb on it.

__________________
1987 Mercedes 300D ~200K (Greasecar & Biodiesel)
1993 Ford F-250 7.3 IDI diesel 165K (Biodiesel)
1996 Thomas/International Bus with DT466 engine
Reply With Quote
  #2  
Old 08-17-2010, 03:01 PM
Registered User
 
Join Date: Apr 2007
Posts: 342
Dan,

There's a barb under the crimp ferrule on that hose. Gitcha some 5/16" or 8 mm ID hose that's bio safe. Drain the tank (I just run the tank low by driving, then place the under-hood return line into a 5-gal jug and let the engine pump itself dry). Remove the hose by loosening the worm clamp on the line end and then unscrewing from the tank end (17 mm?). Cruise over to the workbench and use all manner of dremels, die grinders, hack saws, tin snips, and whathaveyou to mangle the ferrule off. Cut off the remainder of the hose. Screw the newly-bare barb back into the tank. Install your new rubber (about 12" 300 mm maybe) and TWO worm clamps (you'll need one more than is on the car now). You'll probably want to change the return line then, too, but it already has two clamps so it's easy. The bigger 3/8" 10 mm line is for the tank vent, don't worry about it IMO.
__________________
James Marriott
2003 Buick Regal
1983 300D (228k, frau Auto)
1996 Suburban K2500 (192k, 6.5 turbo diesel/4WD towmaster 10,000)
www.engineeringworks.biz
1987 300SDL junker 170k
1982 300SD junker, 265k
Reply With Quote
  #3  
Old 08-17-2010, 03:03 PM
Jeremy5848's Avatar
Registered Biodiesel User
 
Join Date: Mar 2006
Location: Sonoma Wine Country
Posts: 8,402
I replaced all of the short hoses at the fuel tank of my '87 with Viton but It's been a couple of years and I don't remember exactly what I did. Don't think I had to change any metal fittings.
__________________

"Buster" in the '95

Our all-Diesel family
1996 E300D (W210) . .338,000 miles Wife's car
2005 E320 CDI . . 113,000 miles My car
Santa Rosa population 176,762 (2022)
Total. . . . . . . . . . . . 627,762
"Oh lord won't you buy me a Mercedes Benz."
-- Janis Joplin, October 1, 1970
Reply With Quote
  #4  
Old 08-17-2010, 03:33 PM
Registered User
 
Join Date: Dec 2003
Location: Festus MO
Posts: 762
I used the grinder/cut-off wheel technique to expose the brass barbed fitting that is hidden underneath the factory crimped end.
__________________
'93 190E/D 2.5 Turbodiesel 5-speed (daily driver)
'87 190D 2.5 Turbo rustbucket - parts car
'84 Dodge Rampage diesel - Land Speed Record Holder
'13 Ram 2500 Diesel
'05 Toyota 4Runner
Reply With Quote
  #5  
Old 08-17-2010, 04:00 PM
Biodiesel300TD's Avatar
|3iodiesel300T|)
 
Join Date: Dec 2004
Location: Albany, OR
Posts: 4,845
As stated above there is a normal barb under the crimped fitting in the tank strainer. You can cut it off and put a normal piece of hose on. I'd suggest the SAE 30R9 hose. It's lined with viton and much more durable than solid viton. The barb fitting threads out of the tank screen, so you can take it off and work on it. This would also be a good time to remove the tank strainer and clean it. Make sure to put on a new o-ring before you install the strainer back in. I'd replace both the supply and the return while you're under there so you don't ahve to do it again.
__________________
Andrew
'04 Jetta TDI Wagon
'82 300TD ~ Winnie ~ Sold
'77 300D ~ Sold
Reply With Quote
  #6  
Old 08-17-2010, 04:20 PM
Diesel Dan's Avatar
Registered User
 
Join Date: May 2006
Location: Austin, TX
Posts: 264
Thanks for the tip on the hidden hose barb guys! I've had to drain the tank before to check the tank screen and could shoot myself for not changing the hose then! What a miserable job! I've got some of that SAE 30R9 hose. It was pricey at NAPA for like $8 per foot for the Gates brand. I need to find a better deal somewhere else. Also, does anyone know a good place to get a viton gasket for the tank screen? Might as well deal with that while I'm messing around under there...
__________________
1987 Mercedes 300D ~200K (Greasecar & Biodiesel)
1993 Ford F-250 7.3 IDI diesel 165K (Biodiesel)
1996 Thomas/International Bus with DT466 engine
Reply With Quote
  #7  
Old 08-17-2010, 07:12 PM
Biodiesel300TD's Avatar
|3iodiesel300T|)
 
Join Date: Dec 2004
Location: Albany, OR
Posts: 4,845
Greaseworks sell 5/16" SAE 30R9 hose for $5.50/foot -
http://www.greaseworks.com/store/index.php?cPath=27_43_44

As well as a viton tankscreen o-ring for $2.50 -
http://www.greaseworks.com/store/product_info.php?cPath=25&products_id=321
__________________
Andrew
'04 Jetta TDI Wagon
'82 300TD ~ Winnie ~ Sold
'77 300D ~ Sold
Reply With Quote
  #8  
Old 08-20-2010, 10:36 PM
Registered User
 
Join Date: Jul 2010
Location: Hamilton Ontario Canada
Posts: 394
go to gates.com and click on where to buy. Click on industrial distributors, they will be cheaper.

To get a better deal, wait outside until someone with a company truck shows up. Go in after they leave, tell the owner you work for the same company, but would like to make a personal purchase. When you quote the SAE 30R9 spec, you will be believed and get the lower price.
Reply With Quote
  #9  
Old 08-20-2010, 11:52 PM
compress ignite's Avatar
Drone aspiring to Serfdom
 
Join Date: Feb 2004
Location: 32(degrees) North by 81(degrees) West
Posts: 5,554
Tygothane

U.S. Plastics
__________________
'84 300SD sold
124.128
Reply With Quote
  #10  
Old 08-21-2010, 12:50 AM
layback40's Avatar
Not Banned
 
Join Date: Nov 2009
Location: Victoria Australia - down under!!
Posts: 4,023
Weird,
Dont give out too many tricks like that or every one will be doing it!! Probably if you ask nice, the sales rep would give you a foot of hose for trial purposes on your "special project"? That works from time to time.
__________________
Grumpy Old Diesel Owners Club group

I no longer question authority, I annoy authority. More effect, less effort....

1967 230-6 auto parts car. rust bucket.
1980 300D now parts car 800k miles
1984 300D 500k miles
1987 250td 160k miles English import
2001 jeep turbo diesel 130k miles
1998 jeep tdi ~ followed me home. Needs a turbo.
1968 Ford F750 truck. 6-354 diesel conversion.
Other toys ~J.D.,Cat & GM ~ mainly earth moving
Reply With Quote
  #11  
Old 08-21-2010, 12:06 PM
4x4_Welder's Avatar
Registered User
 
Join Date: Dec 2009
Location: Poulsbo, WA
Posts: 504
Oreilly's has a high pressure rated fuel hose that has a blue liner that I have been told is good for use with diesel and biodiesel.
Reply With Quote
  #12  
Old 01-26-2011, 02:37 PM
Diesel Dan's Avatar
Registered User
 
Join Date: May 2006
Location: Austin, TX
Posts: 264
Quote:
Originally Posted by compress ignite View Post
U.S. Plastics
I've tried several different types of translucent fuel hose, and none of it stood up to biodiesel/WVO long term.
__________________
1987 Mercedes 300D ~200K (Greasecar & Biodiesel)
1993 Ford F-250 7.3 IDI diesel 165K (Biodiesel)
1996 Thomas/International Bus with DT466 engine
Reply With Quote
  #13  
Old 01-26-2011, 02:52 PM
compress ignite's Avatar
Drone aspiring to Serfdom
 
Join Date: Feb 2004
Location: 32(degrees) North by 81(degrees) West
Posts: 5,554
Tygothane (Saint Gobain is the Manufacturer)

http://www.plastics.saint-gobain.com/

http://www.tygon.com//uploadedFiles/SGtygon/Documents/Tygon_Tubing/PolyurethaneTubing-Tygothane-C210A.pdf

http://www.tygon.com/tygothane-polyurethane-c210a-tubing.aspx

OR

http://www.tygon.com//uploadedFiles/SGtygon/Documents/Tygon_Tubing/PolyurethaneTubing-Tygothane-C544AIB.pdf
Attached Thumbnails
Biodiesel is eating the fuel supply hose from my tank!-screenhunter_01-jan.-26-14.46.jpg  
__________________
'84 300SD sold
124.128
Reply With Quote
  #14  
Old 01-30-2011, 01:27 PM
Renntag's Avatar
User Especial
 
Join Date: Jul 2008
Location: Kona, Hi
Posts: 1,396

Nice. According to the info above, looks viable. Where did you buy yours?
If you are using this product, for how long now and how exactly are you using it?

Thanks.
__________________
83 300TD (need rear wiper assembly dead or alive)
84 300SD Daily driver
85 300TD almost 400k miles and driven daily.
98 E300D *sold
86 300SDL *sold and made flawless 10 hour journey to new home.
Reply With Quote
  #15  
Old 01-31-2011, 08:56 PM
Yak Yak is offline
Registered User
 
Join Date: Aug 2009
Location: San Antonio, TX
Posts: 1,711
Quote:
Originally Posted by Diesel Dan View Post
I've tried several different types of translucent fuel hose, and none of it stood up to biodiesel/WVO long term.
Bio or WVO? A single-tank conversion?

If the biodiesel is going through new hoses maybe it's the brew that's off, not the quality of the hoses.

I thought most modern hoses were alledgedly bio-resistant, with Viton being the trademarked "most resistant."

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 09:47 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page