|
|
|
#1
|
||||
|
||||
Fuel priming / air leak theory
hi all,
I replaced my diesel fuel filters on my 300D yesterday. Replaced, filled with fuel, primed, started right up. Sporadically now on startup or seconds thereafter it has a couple stutters which are air in the fuel system. Is it possible I just need have trapped air somehow and need to re-prime, or do I definitely have an air leak? I think the answer is air leak, but just wanted to confirm. thanks, dd
__________________
------------------------------- '85 300D, 'Lance',250k, ... winter beater (100k on franken-Frybrid 3 Valve Kit) '82 300D, 'Tex', 228k body / 170k engine ... summer car '83 300TD Cali Wagon 210k, wife's car |
#2
|
||||
|
||||
Did you fill the secondary filter with diesel before you started the priming process?
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#3
|
||||
|
||||
whunter - I will give you a call when I am on break. thank you!
hey army! Quote:
My system is a tad 'special' due to my WVO conversion (that has been in place for 3 yrs / 40k+). The lift pump is plumbed after the secondary filter (as opposed to before it), so that assembly is under vacuum as opposed to pressure. My priming procedure involves loosening the bolt at the inlet to the IP since that the easiest place for me to access that's under pressure. I then pump until I feel that I have gotten the air out (and spilled diesel all over the ground) and then close the bolt and pump until I hear the 'buzz' sound from the IP indicating prime. My question really revolves around if the engine goes on a 50 mile trip just fine, and then has air upon restart, does that definitively indicate an air leak?
__________________
------------------------------- '85 300D, 'Lance',250k, ... winter beater (100k on franken-Frybrid 3 Valve Kit) '82 300D, 'Tex', 228k body / 170k engine ... summer car '83 300TD Cali Wagon 210k, wife's car |
#4
|
||||
|
||||
Quote:
Do you have a vacuum gauge on the common of your supply valve? That is the most useful diagnostic tool for running WVO. Do you have a clear return line? That is another most useful diagnostic tool. Did you ever fix your starter problems?
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#5
|
||||
|
||||
Yes, the wire going to the starter was loose I should go back and update that thread.
I don't have a vac gauge or clear tubing. The car stutters when going back to diesel from VO so I know it's a diesel side problem. I did go down to the garage and see that my diesel side clear pre filter half empty. That pretty much nails it....leakity leakity. I tightened hose clamps and the secondary filter.
__________________
------------------------------- '85 300D, 'Lance',250k, ... winter beater (100k on franken-Frybrid 3 Valve Kit) '82 300D, 'Tex', 228k body / 170k engine ... summer car '83 300TD Cali Wagon 210k, wife's car |
#6
|
||||
|
||||
Those Mityvac things look great but they cost a fortune here. I just bought a vacuum gauge for 12 euros and a few connection pieces with a bit of tubing. It is better than nothing. (I'm keeping an eye out for a Mityvac thing though - when the price is right I will pounce!)
Oh yeah I agree with funola about a leak somewhere (if that helps)...
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#7
|
|||
|
|||
Quote:
__________________
Beagle |
#8
|
||||
|
||||
It must have been modified since he ran 40k with no problems. Wouldn't hurt to check the modification though.
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#9
|
||||
|
||||
Quote:
I tightened all the clamps and didn't see any fuel level drop overnight in the prefilter, but still had some stuttering upon switching back to diesel when I arrived at work. Next chance I get I'll re-lube and re-seat the secondary diesel filter and secondary filter banjo bolt. I didnt touch anything in the fuel system besides the immediate connections to the filters. Thank you all for the help thus far.
__________________
------------------------------- '85 300D, 'Lance',250k, ... winter beater (100k on franken-Frybrid 3 Valve Kit) '82 300D, 'Tex', 228k body / 170k engine ... summer car '83 300TD Cali Wagon 210k, wife's car |
#10
|
||||
|
||||
Quote:
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
#11
|
||||
|
||||
Quote:
Thanks for the compressor tip - I might be able to get the same effect with a vacuum cleaner - the motor might race a bit though! I was going to start low-tech with a bicycle pump though...
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#12
|
||||
|
||||
FYI
Quote:
|
#13
|
||||
|
||||
Quote:
__________________
1992 W201 190E 1.8 171,000 km - Daily driver 1981 W123 300D ~ 100,000 miles / 160,000 km - project car stripped to the bone 1965 Land Rover Series 2a Station Wagon CIS recovery therapy! 1961 Volvo PV544 Bare metal rat rod-ish thing I'm here to chat about cars and to help others - I'm not here "to always be right" like an internet warrior Don't leave that there - I'll take it to bits! |
#14
|
||||
|
||||
FYI
I will try to get pictures of my small units for you.
. |
#15
|
||||
|
||||
Quote:
Do you have this fuel configuration: tank > pre filter > filter > 3 way valve > priming pump > IP ? It is just about impossible to purge air out of the system using the priming pump in this configuration with the FSM method. A Mityvac on the return won't work either since the banjo bolt is plugged and you are pulling the pressure relief valve closed.
__________________
85 300D turbo pristine w 157k when purchased 161K now 83 300 D turbo 297K runs great. SOLD! 83 240D 4 spd manual- parted out then junked |
Bookmarks |
|
|