|
|
|
|
|
#1
07-25-2007, 11:23 AM
|
|||
|
|||
|
Sprung Door
I have a sprung passenger side front door on my son's 300SD. When moving it off a trailer, the door was open, and the door literally was bent back. Is there a relatively easy fix, or is this one out of the range of a DIY'er and best left to a professional? If it needs to go to a pro, any ideas of how much cost to repair?
|
|
#2
07-25-2007, 03:51 PM
|
||||
|
||||
|
The door is junk. Cost of repairs will depend on finding a used door at the right price,,, if the A pillar is bent,,, painting,,, etc, etc, etc. If that were a typical insurance repair we would probably be in the 2 to 3K range.
__________________
95 SL500 Smoke Silver, Parchment 64K 07 E350 4matic Station Wagon White 34K 02 E320 4Matic Silver/grey 80K 05 F150 Silver 44K
|
|
#3
07-25-2007, 04:05 PM
|
||||
|
||||
|
You are going to be dollars ahead and a better fix to hit the salvage yards and pick up a door.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o)
|
|
#4
07-25-2007, 07:25 PM
|
|||
|
|||
Door I can live with
for a bit. However, the door won't shut - which to me indicates a pillar damage. My main concern right now is to get the a pillar straightened. Is that one a real biggie?
|
|
#5
10-22-2007, 11:51 AM
|
|||
|
|||
|
Took advice
and now we have a replacement door on the vehicle. Only, it is black. So, we will get a paint job in the near future, which was needed anyway.
|
 |
| Bookmarks |
|
|
Linear Mode
