Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes ShopForum > Do It Yourself Links & Resources > Bodywork > Body Repair

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-01-2009, 08:26 PM
Registered User
 
Join Date: Jul 2003
Location: BC, Canada
Posts: 99
190E rust spot on window seal

Hello;

I'm looking at several 190E's for purchase. I've read that the 190E's have a tendency to rust around the window seal. Were all versions of the 190's bad for this? Is there a permanent repair with an improved seal? I haven't heard about this with other similarly aged Mercedes.

On one model that I am considering, there is rust about 1" long and well bubbled. What would you budget for repair or would you walk away assuming that the repair is around the entire window?? The model is a 1990 2.3 with a 5 speed manual and is otherwise very well maintained (records show this) although fairly high mileage (166,000 miles).

Thanks,
Paul
Reply With Quote
  #2  
Old 09-01-2009, 10:02 PM
t walgamuth's Avatar
dieselarchitect
 
Join Date: Apr 2005
Location: Lafayette Indiana
Posts: 31,930
You could have a windshield expert come to your home and remove the windshield for you (maybe cost from 50 to 100). Clean and rust bind the rusty areas and apply high quality paint, then have the tech come back and install the windshild.

If your windshield is pitted it might be a good time to replace it.
__________________
Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins& six speed; I have had about 35 benzes. I am finishing a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual....I also have a Lotus 7 replica autocrosser with a modified K20 Acura engine.
Reply With Quote
  #3  
Old 09-02-2009, 12:49 AM
86560SEL's Avatar
Registered User
 
Join Date: Jan 2003
Location: east Tennessee (southeast USA)
Posts: 3,002
I dont know. I had a 1984 190D (same as the 190E, except diesel) and it didnt have that problem, but it was a southern car. Not sure if cars from up north with "salty roads" had more problems or not. Maybe they did and those from the coastal areas with the salt air.
Reply With Quote
  #4  
Old 09-02-2009, 01:19 AM
Registered User
 
Join Date: Jul 2003
Location: BC, Canada
Posts: 99
This is what the rust spots look like....

There is also rust at the right rear wheel arch. Pictures of the offending rust spots - I was given a verbal estimate of $1000 for repairing this but the wheel arch rust looks too far gone for simple sand and repaint.

The car looks great otherwise and appears mechanically sound but this rust looks scary to me.

Thanks, Paul
Attached Thumbnails
190E rust spot on window seal-1991-mb-190e-top-left-windshield-frame-lo-res.jpg   190E rust spot on window seal-1991-mb-190e-top-right-windshield-frame-lo-res.jpg   190E rust spot on window seal-1991-mb-190e-rr-wheel-arch-rust-lo-res.jpg  
Reply With Quote
  #5  
Old 09-14-2009, 12:20 AM
Registered User
 
Join Date: Jul 2003
Location: BC, Canada
Posts: 99
Cost estimate for the rust repair - 190E windshield seal area

Hi all;

I though that I would share what I found.

I received somewhat similar responses from 3 body shops. In all cases, the repair is very expensive if properly done - about $2500-$3000. The reason for the expense (as I was told) is that there are not any replacement panels for the 190E for these areas and, therefore, the metal work requires building small replacement panels. The rust at the windshield seals also appeared to be at a weld location for the roof panel to the A-pillar so apparently this adds complication to the repair.

A cheap bondo job was much less but still not cheap - about $1000.

In all cases, the estimators stated that there was no guarantee and there was likely rust elsewhere so any repairs would likely be futile.

In other words, the car was not worth the repair costs. So I will keep looking.

Cheers,
Paul
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:47 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page