|
|
|
#31
|
||||
|
||||
Quote:
Same goes for the front.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#32
|
||||
|
||||
caulk
sure changing the gasket is good but expensive and the shop will not guarantee not to break the windshield. also i have found that even after a new windshield is installed sometimes the seal leaks and caulking is still in order.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#33
|
|||
|
|||
R Leo,
Actually I live where road salt is used liberally, Northern PA. I just don't use the good MB in the winter, I have a beater MB for the winter. Bought it as a parts car 6 years ago and it is still going 65,000 miles later. P E H |
#34
|
||||
|
||||
Quote:
Gasket cost me $80+$30 for the MB sealant. The rear windsheild can be done in your driveway in about a day, depending on if you find rust. For the rear windsheild you need to chaulk the gasket in order to get it to seal. In the manual they give you the part # for the chaulk. The W126 at least does not have a gasket up front, a seal is made with the sealent that is used. If you have glass coverage your insurance company will probably cover the windsheild if it is pitted. When I had mine done the guy said if it leaks bring it right back and he will fix it. My concern with running a bead around the rear window is that water will probably get behind it causing more rust. That is already a rust prone area on these cars.
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#35
|
||||
|
||||
caulk
i used to caulk both sides of the gasket. i now only caulk the glass/ gasket side. i dont think the rubber/ body side actually leaks, ordinarily.
__________________
[SIGPIC] Diesel loving autocrossing grandpa Architect. 08 Dodge 3/4 ton with Cummins & six speed; I have had about 35 benzes. I have a 39 Studebaker Coupe Express pickup in which I have had installed a 617 turbo and a five speed manual.[SIGPIC] ..I also have a 427 Cobra replica with an aluminum chassis. |
#36
|
|||
|
|||
Rust treatment
I've had pretty good luck with Ospho -- available at automotive paint shops & sometimes parts stores. It is a clear, watery green, and is phosphoric acid -- did a bunch of rust on a 55 Chevy with it, and it held well. The trick is to let it dry well ...... And, it's inexpensive -- maybe $8 pint.
|
#37
|
||||
|
||||
Darn
Darn, the last few posts to this thread where lost.
|
#38
|
||||
|
||||
I have used this
rust stopper....
http://www.therustdoctor.com/index.html I need to do more work but it did a great job so far on rear molding holes under trim...
__________________
'87 924S '81 280SEL Sold -> 81 300SD - 93 300E w/ 3.2 85 300D- 79 300SD 82 300CD 83 300CD - CA 87 190E 5 spd 87 Porsche 924S "..I'll take a simple "C" to "G" and feel brand new about it..." |
#39
|
|||
|
|||
por-15
I have used POR-15 on two of my vehicles. I coated the entire frames. It seems to work very well. It looks like powder coating. I got it from http://por15store.com . They seem to know what they are talking about and I like their forum. A lot of my questions get answered just by reading it.
|
#40
|
|||
|
|||
Am currently working on a couple of spots in the rear foot wells. My sawzall is the current tool of choice for stopping rust. I was using a cut off wheel on the angle grinder but eesh...the noise, the sparks, the smoke....The sawzall is much kinder and gentler...
__________________
Rob M Norwich, VT USA 1980 240D Euro delivery 4 speed manual silver/blue ~160K miles Last edited by whunter; 07-15-2008 at 10:45 PM. Reason: spelling |
#41
|
|||
|
|||
Quote:
__________________
1983 300-D turbo 1985 300-D turbo 1959 Harley Panhead chopper 1929 Ford coupe restored I hang out with Boneheaddoctor at Schuman Automotive OBK#5 All liberals are mattoids but not all mattoids are liberal. |
#42
|
|||
|
|||
Quote:
__________________
Rob M Norwich, VT USA 1980 240D Euro delivery 4 speed manual silver/blue ~160K miles |
#43
|
||||
|
||||
I just need to register the 300SD and get her a new battery tomarrow. I should have this thing sorted out in a week. (may need brake work) The SDL is coming off insurance as soon as the trans/driveshaft project is done. Then I will winterize it and slip her into the garage until April.
I think I will tailgate the salt truck with the SD. Let it rust, let it rust, let it rust! (to the let it snow tune)
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
#44
|
||||
|
||||
Hmmm
Quote:
A smart person figured out it was the salt leaving spreader generating the numbers. My car is a daily driver; but that does not mean I want it peppered by salt projectiles. |
#45
|
||||
|
||||
Quote:
__________________
1999 SL500 1969 280SE 2023 Ram 1500 2007 Tiara 3200 |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Rust Rust Rust Rust | Peyton300TD | Off-Topic Discussion | 24 | 10-17-2005 12:44 PM |
rust or faded factory rust proof? | ktlimq | Detailing and Interior | 3 | 05-13-2004 05:46 PM |
border between original factory paint and POR-15 or Rust Bullet, etc. | ktlimq | Detailing and Interior | 5 | 03-02-2004 07:31 PM |
W124: rust at the edge of trunk door | ktlimq | Detailing and Interior | 1 | 09-21-2003 02:02 PM |
Yay! All major rust eliminated...for now | KylePavao | Bodywork - Repair, Paint, Tools, Tips & Tricks | 3 | 09-23-2002 01:04 PM |