|
|
|
#1
|
||||
|
||||
High Temp Gray Paint?
On the driverside Euro lights I installed, the gray plastic has got some tan color to it from sun exposure. Is there a high temp gray paint I can use?
Thanks!
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
#2
|
||||
|
||||
Mine are both tanned too. I am just going to use standard gray paint, any high temps will melt the plastic before the paint goes.
__________________
1979 240D- 316K miles - VGT Turbo, Intercooler, Stick Shift, Many Other Mods - Daily Driver 1982 300SD - 232K miles - Wife's Daily Driver 1986 560SL - Wife's red speed machine |
#3
|
||||
|
||||
Good idea. I was thinking high temp due to some of the heat from the lights hitting the plastic, but then again, like you pointed out, the plastic would melt, and it has not done so yet.
__________________
RRGrassi 70's Southern Pacific #5608 Fairmont A-4 MOW car 13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete. 91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K 90 Dodge D250 5.9 Cummins/5 speed. 400K |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|