|
|
|
#1
|
||||
|
||||
Have I used the wrong gauge metal. W115
Hi,
I would be grateful for any advice. I cut out the rust on my floorpan from where the rocker meets the floor to the angled crossmember on front drivers side. I got new sheetmetal and cut and fitted new piece into place with pop rivets until I can get it welded. After I finished I got to thinking that because the sheet metal I fitted is slightly thinner than the origonal would I be compromizing the safety of the car.... I know, I should have thought about it before I started. Many thanks RP |
#2
|
|||
|
|||
What gauge did you use? It's probably still stronger than the rust.
|
Bookmarks |
|
|