![]() |
Who has the most rust and still drives
Hello Everyone
Who has the most rust and still drives? I would like to see pictures if possible. Special interest in structure damage from rust. Thank you. Have a great day. |
interesting, interesting. Well, I don't have that much rust and I drive a w116 in the midwest! It moved here about 10 years ago from New Orleans though, so that is probably why. This should get interesting.
David |
That's probably going to be me. The 240D is affectionately known as "Perfesser Leaky." Not because it leaks oil out, but because of all the water leaks through the rust holes. :eek:
|
You have a Rolls-Rust ?
You have a rusty one?
I thought you had a nice car? ;) Must run great for you to keep it. |
do chevy's count?
My ex-brother -in-law had a very rusty 1972 chevy 4 door back in Buffalo about 10 years ago. He took it through a car wash for whatever reason.... It took the door skin completely off.
|
Special interest in structural damage from rust.
Hello Everyone
I would like to see pictures if possible. I have special interest in structural damage from rust. Any data on which process was used to repair structure damage would be of great interest. I have found what I consider serious rust on my 300SD. Structural arch; by the guide rod mounts. I am also building a slide show of MB rust repair. |
I too have serious rust on that same area. I just replaced all the front end components and had to cut out metal on the support area just to get the old nuts and bolts off for the guide rod bearing bracket. The tower area is badly rusted and I was concerned that the integrity of the entire front end is now compromised. Since I am not set up for welding in my garage I put the front end back together and sprayed "Great Stuff" type foam into all the frame rails and open rusted tower areas. That was 2 months ago and my front end feels as strong as it ever did. I'm not sure what is holding it all together but it all works fine.
|
whunter:
That is a slide show that I must view. I have some rust issues and need to know: a. do I just let it go and keep the safety features up to date? b. do I fight it This fall I worked a bunch of spots and they have bled through already. Don |
I need pictures of all your rust.
Hello diesel don
I must get up to your place soon. I need pictures of all your rust.:D I want to look at your PARTS CARS: '83 300DT 193k (Wrecked):D '83 300D (Euro) Blown Engine:D '82 300D (Euro) Dead:D :D Your local diesel fuel cost is an added attraction for me.:D |
Yea,
We still need to get everyone on the same page. You must meet Bruce Lane as well and some other ol'timers around here. Don |
Trying to post some rust pictures.
1 Attachment(s)
Hello Everyone
Trying to post some rust pictures. 1985 300SD driver side guide rod. |
Repair area.
1 Attachment(s)
Hello Everyone
Trying to post some rust pictures. 1985 300SD driver side guide rod. Repair area. |
Rust on 500SEL
1 Attachment(s)
Hello Everyone
Rust on 500SEL, yes, it is a gasser. Exhaust pipe. |
Rust on 500SEL, yes, it is a gasser.
1 Attachment(s)
Hello Everyone
Rust on 500SEL, yes, it is a gasser. Muffler. |
Rust on 500SEL #3.
1 Attachment(s)
Hello Everyone
Rust on 500SEL, yes, it is a gasser. All the lines rotted through; can you identify the line with the rubber hose splice? go to the next post for details. |
All times are GMT -4. The time now is 10:32 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website