Anyone know how to remove console switch for Antenna?
 

Can some please advise as to how to remove dash console antenna switch on my 85 300SD? Also...does anyone know if there's a fuse (other than #15 in fuse box) associated with the antenna.

Thanks

Ant Switch
 

I do Not Have the manual for the W126 any more!

AND here we're relying on some defective synapses.

But, look at the longitudinal ends of the switch , and if it's the same as the
window switches you'll probably be able to GENTLY pry it out of the console
with a very fine bladed "Flathead" [PLEASE be very careful of your wood trim,
it is very expensive] :eek:

On Second thought, Belay all that !
risk of damage may be too great if I'm wrong.
"Kick it up to the Moderator"

compress is correct. My manual shows a thin flatblade inserted into the bottom of the switch bezel, which pushes a spring in to allow release. Same at top of switch. There is a recess/hole in the rocker allowing insertion of a bent piece of 4mm wire, like a hook, to pull it out.
There shouldn't be any separate fuse for the antenna, other than the one in the fusebox.