|
|
|
#1
|
||||
|
||||
Becker Speaker Connections
Can someone tell me what type of plug is used to connect the speaker wire to a Becker radio? I have searched the forum and have found the other info needed to help me install another Becker unit in place of the original Becker Mexico unit that came in my W116. The attached photo (taken from another thread) is a picture of the speaker connections in question. What type of plug or connector would make this connection? Does this have both a positive and negative connection?
__________________
|
#2
|
|||
|
|||
I can't tell from the tiny picture, but check out Oasis100's post, picture #3. Would these fit (if your radio has a flat slot and round hole female)?
How do I wire this all together? These are standard MB speaker plugs, at least on the earlier models.
__________________
1986 560SL 2002 Toyota Camry 1993 Lexus |
#3
|
||||
|
||||
Sorry for the tiny photo, yes it looks like the connectors you mentioned from the other post would work. I am attempting to reuse a Becker unit from my '87 300D in my '80 300SD. I installed an aftermarket CD/receiver in the 300D for the wife. I would like to use the "newer" Becker unit in my 300SD so that I gain some presets but keep the stock look. Thanks, now I need to track down the connectors.
__________________
|
#4
|
|||
|
|||
How many do you need? If you have trouble finding them, email me your address and I can send you some. I've probably got 1/2 dozen out in the garage...
__________________
1986 560SL 2002 Toyota Camry 1993 Lexus |
#5
|
||||
|
||||
Thanks donbryce for the kind offer. I will check locally first to see if I can find the connectors, if not I will let you know. The back of the Becker unit has two speaker jacks labeled LEFT and RIGHT. My guess is that this goes to the fader switch and it splits the signal to the front and rear.
__________________
|
#6
|
|||
|
|||
I just thought of something...the rear speakers use these plugs to connect to the harness. Since there are only 2 wires/speaker, just find each speaker connection (pull the speakers, or look underneath the package shelf, in the trunk), remove it, and either splice the wires directly or replace the connector with 2 male/female bullit or spade connectors. You have 4 more of these at the fader switch too.
__________________
1986 560SL 2002 Toyota Camry 1993 Lexus |
#7
|
||||
|
||||
Just back from the local parts yard where I got the two speaker connectors needed.
__________________
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|