|
|
|
|
|
#1
03-09-2007, 06:44 PM
|
||||
|
||||
HELP! 82 300SD Radio Circuit FUBAR
I have a 82 300SD with a Kenwood head unit installed by the previous owner. Only issue is whoever that installed it mucked up everything. The radio memory intermittently worked when I first got the car, now it doesn't work at all.
Armed with the color codes Hit Man X has posted, I kept my eyes out for the following: Brown = ground Black w/ tracer = switched 12v Red w/ white tracer = constant 12v Violet = dimmer What I found was the following: -No Red wire with white tracer -No violet wire -2 Black wires with green/yellow tracer going to ignition wire on the radio -Brown wire goes to the ground on the radio -A blue switched +12V wire that was spliced to go to the constant wire on the radio -And a blue wire spliced from the antenna switch to the antenna control on the radio. In between some of those, the wire was spliced several times, resulting in a mix of colors. If anyone can give me some assistance with this, primarily where to find the constant 12v, it'd be greatly appreciated.
__________________
Jason 00 Subaru Legacy (fun wagon) 96 Nissan Sentra (disavowed) 82 300SD (garage queen, will run again hopefully) 87 300DT (Gone: 10/15/2010) 
|
|
#2
03-09-2007, 07:01 PM
|
||||
|
||||
|
Here's another image, (flash is off, sorry).
__________________
Jason 00 Subaru Legacy (fun wagon) 96 Nissan Sentra (disavowed) 82 300SD (garage queen, will run again hopefully) 87 300DT (Gone: 10/15/2010)
|
|
#3
03-11-2007, 04:11 PM
|
||||
|
||||
Make any progress?
__________________
I'm not a doctor, but I'll have a look.  '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]
|
|
#4
03-14-2007, 04:39 AM
|
||||
|
||||
|
Not yet, sadly. Haven't had time to pull some harnesses from the yard (need a shopping list first actually, lots of other various parts that I need)
__________________
Jason 00 Subaru Legacy (fun wagon) 96 Nissan Sentra (disavowed) 82 300SD (garage queen, will run again hopefully) 87 300DT (Gone: 10/15/2010)
|
|
#5
11-09-2007, 03:45 AM
|
||||
|
||||
|
Where can I get these?
Finally got time to pull the center console and fixed it. Now, anyone know where to get these connectors?
 I've contemplated on just using molex connectors from a computer in the car too. Don't know how well that'll go over. 
__________________
Jason 00 Subaru Legacy (fun wagon) 96 Nissan Sentra (disavowed) 82 300SD (garage queen, will run again hopefully) 87 300DT (Gone: 10/15/2010)
|
|
#6
11-09-2007, 03:51 AM
|
||||
|
||||
|
Trying to go back to stock Becker or what?
I have a few stock harnesses if you need, I can't get AIM to work on this machine so PM me or something.
__________________
I'm not a doctor, but I'll have a look. '85 300SD 245k '87 300SDL 251k '90 300SEL 326k Six others from BMW, GM, and Ford. Liberty will not descend to a people; a people must raise themselves to liberty.[/IMG]
|
 |
| Bookmarks |
|
|
Linear Mode
