Please help, when I brought the car the radio did not work, I took apart the console, looks like for the first time, and pulled it out, the fuse was blown, I replaced the fuse. It lights up and the antenna goes up and down with the power button, but it is just flashing wait on the radio, is it a code I need? Or is the radio just dead, also a few more questions to come..

You need the radio code. If you call the Service Department at your local MB dealer and provide them with the VIN they should give you the code. Your Owner's Manual should instruct which proper radio button(s) to press after entering the radio code ... normally the seek or scan button will activate the radio.

__________________
Fred Hoelzle

You will need the code. "WAIT" means just that, you have to wait until the word code appears.

__________________
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)
Retired Moderator