|
|
|
#1
|
||||
|
||||
How do I get the damn Becker out?
Hey everyone,
I've finally decided to change out the stereo in my car but I don't know how to get the old Becker unit out. I have a Chilton's manual but it says nothing about this. I'd like to be able to do the job myself to save some money. Is it hard to do all the re-wiring? Should I just leave the old wires in there? Thanks so much for the advice. I'll probably go with a pioneer headunit and pioneer speakers (stock sizes) Alex
__________________
1983 300D (parked for four years) 2012 VW Sportwagen TDI Manual 2001 Miata SE 1962 Chevrolet Corvair Rampside |
#2
|
|||
|
|||
Here's a helpful documentary on removing and installing a stereo in a W123.
http://users.vnet.net/w123d/w123d/radio.htm |
#3
|
||||
|
||||
nice web page, but problem is, my stereo doesn't have any of those removable knobs that he talks about. my stereo is all digital with buttons.
__________________
1983 300D (parked for four years) 2012 VW Sportwagen TDI Manual 2001 Miata SE 1962 Chevrolet Corvair Rampside |
#4
|
|||
|
|||
I've installed a stereo in my friend's W126, and his original (Becker) unit is probably the same as yours. Here's how I did it.
Remove the ashtray. Then remove the two exposed screws behind the ashtray and pull out the ashtray frame. Look on the underside of the stereo and you should see two metal clips. Push them in, and pull the stereo out. Hope this helps. |
#5
|
||||
|
||||
Speedy is right. that's how I removed mine.
If you are going to install a high output stereo(35w/ch +) in w126, you may consider to add a pair of 3-way Yamaha Bookshelf speakers(@89/pair and Excellent sound) into those two trays in the back(if you don't need them). Here is how: Remove all speakers and tweeters from the box. (make sure you mark all wires connect to the little crossover accordingly). pull out the crossover. Cut the front layer(1") of the speaker mounting panel with a circular saw (power saw works better because the plywood chip easily and ruin the outside finish of the box). Reinstalled all the speakers and wires. Next step, remove the back seat, back panel, and those 2 trays. put the panel back and install the cut out speaker panel on top. Hook it up to the stereo you will enjoy the great sound system.
__________________
BJ 09 GL320 Bluetec 65K+ 07 E320 Bluetec 43k+ 05 Nissan Frontier NISMO 4X4 72K+ 07 Kawasaki Vulcan 900 5k+ gone 87 300SDL 158k+ gone 91 300D 113k+ gone 83 300SD 220K+ gone 89 300E sold 87 190E sold 83 380SEL sold http://banners.wunderground.com/bann...TX/Houston.gif |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Becker 3302 - Cann't find Info? | rsmcmahon | Car Audio and Multimedia | 7 | 02-02-2005 03:03 PM |
Strange Problem with Becker | backstage1 | Car Audio and Multimedia | 8 | 01-28-2005 01:59 AM |
How can you disable all mute functions on Becker 1492 head? | Peeb | Car Audio and Multimedia | 7 | 12-16-2002 01:50 PM |
500E Becker -- upgrade? resuscitate? | seacoast_benz | Car Audio and Multimedia | 4 | 05-01-2002 01:03 AM |
Becker cassette player question... | BENZ-LGB | Car Audio and Multimedia | 1 | 04-28-2001 08:30 AM |