|
|
|
#1
|
||||
|
||||
antenna retraction 91 190E 2.6
Just got the new antenna from Phil, I followed the instruction and it dose not retract all the way, I still have about four inches standing out when it stops. has any one else had troubles with replacement units? JNT
|
#2
|
|||
|
|||
If you are trying to put a replacement mast assembly into a motor unit were the mast cord broke, then likely you have a piece of the old mast cord in the motor assembly. if that is the case you will need to disassemble the motor unit to remove the piece of broken mast cord.
|
#3
|
||||
|
||||
antenna
no there is not any thing in the gear I did make sure it all came out, thanks any how
|
#4
|
||||
|
||||
antenna retraction
Found the reason for the mast not retracting all the way apparently part of the old mast was still in the lower guide tract. once that was removed it worked just fine.
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|