|
|
|
#1
|
|||
|
|||
Message "PHONE"
When I tried to change a radio on my MB 190E 1990 on radio from ML-320,
I receved a message "PHONE" when I typed anti-threft code. Probably I have wrong connection. Right? Does anyone know when I can find manual on Radio from MB ML-320? Thanks |
#2
|
||||
|
||||
This is a confusing post. You put a radio for an ML into a 190E?
The radio manual would be a seperate booklet from the owners manual. What year is the radio out of? It it just a "normal" DIN-sized radio from a 98 or 99, or an MCS unit? For some reason, the radio thinks a phone is being used, probably just a wiring mistake. Sounds like you need a wiring diagram pertaining to the ML to get things sorted out. Gilly
__________________
Click here to see the items I have up for auction at EBay Click here to see a photo album of my '62 Sprite Project Moneypit (Now Sold) |
#3
|
|||
|
|||
Message "PHONE"
You are absolutely right. I want to put radio from Mercedes ML-320 1998 to my 190E 1990.
This radio has normal size - same like previous device. I just tried to find wireless diagram and figured out that new one has same (probably) connector as VW98. Do you know where can I find wirless diagramm for ML stuff? I guess that I put one wire to Mute connector or something same... |
#4
|
|||
|
|||
Wiring
I used to fit mobile phone carkits, if I remember correctly most mobile phones ground - (chassis) the alert wire either to mute the radio directly or switch the radio off via a relay.
I suspect you may have put one wire to many on the chassis or negative side. and the radio thinks a phone is being used! The only clue I can suggest, without seeing it, is to leave the heavy negative wire from the radio and disconnect the lighter wire which I suspects has also been put to the chassis. I hope that makes more sense to you reading it than to me trying to explain it |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
How do I cancel the message on odometer | joetam | Tech Help | 10 | 03-22-2004 10:35 AM |
Resetting the Error Message | DiDi | Tech Help | 5 | 11-01-2002 06:32 PM |
Oil Sensor Defective message on Instrument Cluster | mitul | Tech Help | 2 | 06-06-2002 05:09 PM |
Turning off annoying message | Glenn Polanco | Tech Help | 1 | 05-01-2002 04:48 AM |
check engine light and message center | mick | Tech Help | 4 | 04-16-2002 11:59 PM |