|
|
|
#1
|
||||
|
||||
Becker Europa Cassette Bluetooth retrofit.
The deck that came in my car didn't have a working tape mechanism.
I loved the radio with the mechanical presets as well as the look of it. So I didn't wanna get the typical rice rocket headunit. I decided that instead of trying to fix the tape deck, I would retrofit it with a Bluetooth audio module. I retain the functionality of the original radio and dials, except the outermost buttons are used for switching between the module and the radio. Now before I started this, I didn't realize that these decks might be somewhat sought after (after seeing eBay prices on these thigs...wow) and then I realized that what I did might be considered disgraceful. If I offended any of you, I apologize! I just wanted to make the deck suit my needs. Also, if anyone wants the hollowed out tape deck mechanicals, let me know.
__________________
1982 240D 4-speed 2013 Jeep Wrangler Sport - 4.10 e-locker |
#2
|
|||
|
|||
i think this is pretty innovative...
was it hard to do? |
#3
|
||||
|
||||
Not at all, it took a bit of patience to trim the digital receiver to fit. And some following traces and experimenting to figure out which points on the amp board were the inputs.
__________________
1982 240D 4-speed 2013 Jeep Wrangler Sport - 4.10 e-locker |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|