I have a becker Mexico original radio in my 1980 300SD. Is it easy to replace a burnt out light? or can someone point me to some instructions. Also is there a site somewhere that gives the colour codes for the wiring harness tto the radio?
Thanks

If you have a becker mexico analog cassette radio then the wiring is really simple. There is only one power wire and it is usually black and it is accessory power then there is a brown wire that is ground and if it is the Mexico then there is a gray cable that extends to the amp that is under the glove box and there is a blue wire if you have a power antenna that is 12v output then the two sets of speaker wires are plugged in the the amp. The light bulb is a little hard to find but through my repair shop we sell them. If you want one call 858-373-0596 and Cleeve can help you with it. This is La jollla Audio repair and we are a becker authorized repair facility. Good luck!

Scott@lajollaaudio

__________________
The Mercedes Specialists Since 1986

Thank You for your help,Moraine and SCLJC. I will be pulling the radio out tomorrow. I've discovered the casette doesn't work also. So I will be faced with decisions soon.