Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Car Audio and Multimedia

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-31-2014, 12:47 PM
Registered User
 
Join Date: Aug 2014
Posts: 2
92 400E Becker tuner not picking any station after re-install

Hoping someone can tell me how the antenna is wired. I had a Kenwood deck installed by "Car Toys" (terrible outfit) and they had a guarantee that they would re-install the original if not satisfied. Was not satisfied, so I had them remove and re-install my original Becker, which worked perfectly before. The deck is back and powers up alright, and the antenna goes up as well, but zero reception fm or am. The cassette player works, but no radio signal. I am hoping it is just a wire they failed to reconnect. Took it back and they claim it is not their problem or warranty to make the old radio work. I know the Becker is a two piece. I bought the tools and pull out the head. all cables look original and connected based on reading other threads here. Now I am looking at the second piece in the trunk, and stuck what to look for next.
Reply With Quote
  #2  
Old 09-13-2014, 10:13 PM
Registered User
 
Join Date: Aug 2014
Posts: 2
Tuner antenna connection

Finally figured it out. So when CarToys put back my Becker back, they didn't bother to connect the antenna. The antenna power is the blue line that goes to the bottom left side of the head. They had clipped the harness and the wire was hanging loose, so I had to crimp on a new male connector and plug it in. The antenna connection itself goes to the bottom right side of the tuner/amplifier located in the trunk, passenger side. In order to install the aftermarket stereo, they had run a cable extension to the front, but didn't bother to disconnect from the extension and plug it back in. Sloppy people, but I guess I should be grateful that they didn't cut/hack all the wires and just tapped into them. Becker is back in and working perfectly :-)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 04:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page