Hello All....

I have almost completed my installation and have hit a bit of a snag. I can's seem to find a way to get ne wiring to the trunk area. The back of the rear seat doesnt seem to want to come out and the back wall, I can't get through. I'm Stumped!

Also... I need to run a new hot lead for the Sub to the Battery (they tell me) ...where is the easiest place to get through the firewall? I have brought the wiring down the drivers side.

Thanks for any help!

Steve

I'll post pics when I'm finally done!

What model Benz are you working on?

__________________
past MB rides:
'68 220D
'68 220D(another one)
'67 230
'84 SD
Current rides:
'06 Lexus RX330
'93 Ford F-250
'96 Corvette
'99 Polaris 700 RMK sled
2011 Polaris Assault
'86 Yamaha TT350(good 'ol thumper)

Its a 90 300e

But, I got it done....
The trick is the seat back.
Once you remove the seat bottom the 3 screws that hold the back in place (1 on each lower side and one in the middle) pull up on the seatback and remove it. This exposes 2 nice holes to run cables through behind the seat back!

Good Luck!

Steve