Power Antenna
I own a 93 MB 300E 2.8. The antenna motor works when I turn the radio on and off, but the antenna does not extend or descend. It was extended out when it lost movement. Is this a stripped antenna motor gear? I looked over other antenna question submits, but was not quite sure they covered my problem. Thanks.
|
Most likely, the nylon rod attached to the metal antenna is stripped.
Very easy to replace in about 10 minutes. JackD |
You might try this...
Stand next to the antenna when someone else turns off the radio and give the top of the antenna a little pop downward. If the antenna is just stuck because of grit or a slight bend it will move. It may just need a little cleaning and lube. |
All times are GMT -4. The time now is 05:17 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website