|
|
|
#16
|
|||
|
|||
what did you use as a ring around the speaker to make it stick out from the door itself?
|
#17
|
||||
|
||||
300SDL
the doors had empty holes for speakers when I acquired the van but they were too small for the speakers I was given after a recent install. I made a spacer ring out of 3/4" particle board that gave me the clearance for the rear of the speaker. If you feel the need to do this remember to use gasket material on both sides of the speaker ring to make it as air tight as possible.
__________________
1986 420SEL. 200,000 miles plus. 1991 Cutlass Supreme 1980 VW Vanagon (Old Smokey) |
#18
|
|||
|
|||
thanks,
Im still trying to find a way to mount them so they can be atleast a little more flush u know? either via kick panels or finding a door from a 560 with the speakers in the doors..hmmm thanks again, Bob |
#19
|
||||
|
||||
300SDL
Sorry for the long silence, I just got a new job and I work from midnight till 8am. Not a lot of time for anything else but I will start to post the kickpanel construction photos at least one per day as I can only spare one hour for my projects. The door speakers in my VW are an emergency temporary measure only. I only had about an hour to install a complete system in the VW. Headunit, 2 frontstage speakers and 2 8" subs and a four channel amp. It is not pretty now but it will be when I am done.
__________________
1986 420SEL. 200,000 miles plus. 1991 Cutlass Supreme 1980 VW Vanagon (Old Smokey) |
#20
|
||||
|
||||
300SDL
This is step one: Apply tape and foil in your target area to protect from accidental fiberglass resin application.
__________________
1986 420SEL. 200,000 miles plus. 1991 Cutlass Supreme 1980 VW Vanagon (Old Smokey) |
#21
|
||||
|
||||
300SDL
Step two: Cut fiberglass mat into 3" x 3" strips, mix resin and hardener and brush strips onto target area. Keep windows rolled down to allow fumes to escape. It is better to make this layer larger than you think you will need because it can be trimmed down.
__________________
1986 420SEL. 200,000 miles plus. 1991 Cutlass Supreme 1980 VW Vanagon (Old Smokey) |
#22
|
|||
|
|||
i see.....
|
#23
|
||||
|
||||
300SDL
This next photo shows materials needed for the next step; MDF, resin, activator, rubber gloves, paintbrush, acetone, baffle template, fiberglass mat, polyester fabric, flex-board, glue and mixing container.
__________________
1986 420SEL. 200,000 miles plus. 1991 Cutlass Supreme 1980 VW Vanagon (Old Smokey) |
#24
|
||||
|
||||
MTI...?
Which Infinity Speakers fit in a W126 dash? Some people say certian 4X6 speakers fit there. Did you put 4X6's in there or 3 1/2 or 4" Infinity speakers in there.
__________________
85 300CD Signal Red/Tan sold 83 300D Manganese Brown 109K 97 E420 Midnight Blue 197K sold 98 BMW 328i Vert White 100K, sold 95 BMW 525i White 125K, sold 93 BMW 525iT Red 193K, sold 95 E320 Green Wagon 125K, sold 94 E320 White 127K, sold 85 300SD 156K Grey (Annie), sold 84 300D Lapis Blue 170K (Judy), sold 99 ML 320 Black (lease), 1998 C230 White (lease) 00 Honda S2000 Red (lease) 86 Mercedes 300E (sold) 84 Porsche 911 Red (sold), 1965 Porsche 911 White (sold) |
#25
|
||||
|
||||
4x6 speakers can be trimmed. wait, some if not most of them can be. i have a infinity 4x6 that sits in there, not held on by screws (the screw points had to be shaved off. but it wedges in there nicely.
__________________
198? 300D ???K - Future DD 1989 300TE 285K - traded in '12 1984 300SD 186K - Sold in 08 1978 300SD 330K - Died in 05 |
#26
|
||||
|
||||
ned, which Infinity model do you have? I've got to get the same one, they're the best speakers I've heard. I put the 4" in my 300D. They actually don't fit. The speaker cover sits on top of them about a 1/2" but they sound great. But for my wife's 300SD, I don't think she'll go for the raise speaker look, hehe.
__________________
85 300CD Signal Red/Tan sold 83 300D Manganese Brown 109K 97 E420 Midnight Blue 197K sold 98 BMW 328i Vert White 100K, sold 95 BMW 525i White 125K, sold 93 BMW 525iT Red 193K, sold 95 E320 Green Wagon 125K, sold 94 E320 White 127K, sold 85 300SD 156K Grey (Annie), sold 84 300D Lapis Blue 170K (Judy), sold 99 ML 320 Black (lease), 1998 C230 White (lease) 00 Honda S2000 Red (lease) 86 Mercedes 300E (sold) 84 Porsche 911 Red (sold), 1965 Porsche 911 White (sold) |
#27
|
||||
|
||||
they are the old reference series. its not the oval ones, but the speparate ones ( a 4" woofer, and tweeter). the covers do not fit on mine since i had problem with the woofer hitting the platic when i had it on. they sound nice but one of them went out because of the hot weather making the glue from the cone and rubber separate. i need to fix that.
here's a link if u want to chack it out. http://www.cardomain.com/member_pages/view_page.pl?page_id=335117&make_type_query=make%3DMercedes-Benz&model_brand_query=model%3DS-Class&tree=Mercedes-Benz%20S-Class
__________________
198? 300D ???K - Future DD 1989 300TE 285K - traded in '12 1984 300SD 186K - Sold in 08 1978 300SD 330K - Died in 05 |
#28
|
||||
|
||||
<< the covers do not fit on mine since i had problem with the woofer hitting the platic when i had it on.>>
ned, the MB cover didn't fit over the speaker? Is this because the speaker is raised so the cover doesn't fit on top or because the speaker is hitting something underneath and can't sit in deeply enough? Thanks, edge
__________________
85 300CD Signal Red/Tan sold 83 300D Manganese Brown 109K 97 E420 Midnight Blue 197K sold 98 BMW 328i Vert White 100K, sold 95 BMW 525i White 125K, sold 93 BMW 525iT Red 193K, sold 95 E320 Green Wagon 125K, sold 94 E320 White 127K, sold 85 300SD 156K Grey (Annie), sold 84 300D Lapis Blue 170K (Judy), sold 99 ML 320 Black (lease), 1998 C230 White (lease) 00 Honda S2000 Red (lease) 86 Mercedes 300E (sold) 84 Porsche 911 Red (sold), 1965 Porsche 911 White (sold) |
#29
|
||||
|
||||
the problem was that since the thickness of the black plastic surrounding is about 3-4mm thick as appose to the 1-2 mm stock metal speakers mounting surround. i hope u know which part i am talking about. so the "clips" for the speaker cover will not go in all the way, also the infinity rubber woofer surround sticks up about 2-3 mm. so when u put the covers on it will push down because of these 2 added thicknesses. and under heavy midbass it will rattle (cone hitting cover).
not sure i explained that as well but u can see what i am saying right?
__________________
198? 300D ???K - Future DD 1989 300TE 285K - traded in '12 1984 300SD 186K - Sold in 08 1978 300SD 330K - Died in 05 |
#30
|
||||
|
||||
I hear you, maybe the other 4X6 model will fit: Infinity REF6402CF
__________________
85 300CD Signal Red/Tan sold 83 300D Manganese Brown 109K 97 E420 Midnight Blue 197K sold 98 BMW 328i Vert White 100K, sold 95 BMW 525i White 125K, sold 93 BMW 525iT Red 193K, sold 95 E320 Green Wagon 125K, sold 94 E320 White 127K, sold 85 300SD 156K Grey (Annie), sold 84 300D Lapis Blue 170K (Judy), sold 99 ML 320 Black (lease), 1998 C230 White (lease) 00 Honda S2000 Red (lease) 86 Mercedes 300E (sold) 84 Porsche 911 Red (sold), 1965 Porsche 911 White (sold) |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|