Parts Catalog Accessories Catalog How To Articles Tech Forums
Call Pelican Parts at 888-280-7799
Shopping Cart Cart | Project List | Order Status | Help




Go Back   PeachParts Mercedes-Benz Forum > Mercedes-Benz Tech Information and Support > Car Audio and Multimedia

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-05-2003, 04:17 AM
Bob_Holbert
Guest
 
Posts: n/a
Question W126 280SE speakers

I have reviewed the archives for this and the Benzworld forums for messages regarding upgrading speakers in a W126 280SE.

It has been suggested that, with a little metal work, it is possible to fit 6.5 inch speakers in the 4 x 6 rear deck locations.

Has anyone actually done this? Are you able to retain the standard rear deck?

I am looking to install 6.5 inch Canton coaxials in the rear deck, and 6.5 inch Canton splits in the front, with the tweeters in the stock location and custom pods fitting to the front doors, hopefully without inflicting too much damage to the standard trim.

Also, does anyone have any advice on the best way to run a power lead from the battery, through the firewall and back to the boot to power an amp?
Reply With Quote
  #2  
Old 03-05-2003, 09:57 AM
La Jolla Audio
 
Join Date: Dec 2001
Location: San Diego California
Posts: 996
Hwew is a pic of the stock grommet in the firewall and there is opening for more wires to go through. As far as 6.5 in speakers in the rear deck I have done that install many times and it does take a little metal cutting and you will need to make a thick baffle board to allow the speaker to sit up to clear the trunk springs!

Scott@lajollaaudio
Attached Thumbnails
W126 280SE speakers-factory-firewall-grommet.jpg  
__________________
The Mercedes Specialists Since 1986
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On




All times are GMT -4. The time now is 02:41 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2018 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website -    DMCA Registered Agent Contact Page