94 E420 - Amp wiring diagram
Does anyone know the wiring diagram for the Amps in the 94 E420s? There are 2 amps, one for the left side and one for the right side. I need to know in order to bypass them without cutting any of the wires.
If not, I could probably figure it out. There are 11 prongs on the harness plug (a 12th is just a blank). Each amp (I assume) has 2 input wires and 2 output wires for the front speakers... and the same for the rear. That's 8. Add another 1 for power and maybe 1 for ground. That's 10. Not sure what the last one would be. Any help would be appreciated. Willy |
I think I have it!!!
Folks,
I think I answered my own question. I did some digging on the w124 CDs and found the entire sound system wiring guide. As best as I can see, this is layout for the plug connected to the amp. This is for the right side amp... left is the same. 1 Blank/unused 2 Output-to speaker (Right front -) 3 Input-from radio harness connector B-#3 (Right front +) 4 Output-to speaker (Right front +) 5 Input-from radio harness connector B-#4 (Right front -) 6 Power-Tied to Left Amp #6 7 Input-from radio harness connector B-#2 (Right rear -) 8 To Left Amp #8 9 Input-from radio harness connector B-#1 (Right rear +) 10 Output-to speaker (Right rear -) 11 Ground-Tied to Left Amp #11 12 Output-to speaker (Right rear +) I need to test this to be absolutely sure. Anyway, assuming this is correct, I should be able to bypass the amp by unplugging the connectors and jumping the following on each connector: 4 - 3 5 - 2 7 - 10 9 - 12 Comments??? Willy |
All times are GMT -4. The time now is 03:30 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website