|
|
|
#1
|
|||
|
|||
I usually use Meguiars Professional Swirl mark remover(Old Formula #9) on my black 190e. It does a fairly good job. I would like to know if their is a better meguiars formula thats better at getting deep down swirl marks and light scratches. Also, is it safe to use regularly on a 99' E320 or 98' 740il, which are also black finishes?
|
#2
|
||||
|
||||
Are you applying by hand or buffer? A good orbital buffer will do wonders. My experience has been that only a buffer will eliminate deep swirls and light scratches.
Try clicking on the Meguiar's banner at the top of this page. They have several different compounds that might do the trick. ------------------ Bill Wood - Webmaster MercedesShop.com, LLC |
#3
|
|||
|
|||
JP,
The "ole #9" is a good swirl remover for most swirls that are in the paint. If you have really deep swirls or light scratches that the #9 (when applied once or twice by orbital) isn't getting there are some more aggressive products (in the Mirror Glaze line) you can use. Go through the Meguiar's banner and check their recommendations out. In my experience #9 is good for light swirls and is safe to use a couple times a year. (every few months if necessary) Anything more severe than #9 will probably be a "one time only" product. If you have been applying #9 by hand then get an orbital. It makes a HUGE difference with #9 and is the preferred method for anything more severe as well. Hope this helps...Lee |
#4
|
|||
|
|||
I always apply the swirl mark remover by hand. I plan on trying out my friends orbital buffer and if it works well, maybe ill buy one. The one advantage to a buffer is that its less work and less time. I always thought that when applying waxes and polishes it was best to do it by hand, but i guess im wrong.
|
#5
|
|||
|
|||
The prime advantage to applying/removing by hand is that no machine can match the dexterity of the human hand. (especially with a competant brain behind said hand) I use an orbital for major work, stubborn stuff, or to save effort. If you are good enough you can do non-repetitive motion jobs (like wax) quicker by hand than an orbital. The orbitals work great for applying many things, especially swirl-removers, but you still get best results removing by hand. The orbitals can save you a ton of time and effort on a long project. (say: wash, deswirl, polish, wax all in the same sitting) Certain models have curves, shapes, etc that can impair the use of an orbital and that is where the manual method shines. (no pun intended) Just make sure the buffer has safe pads on it or it becomes an orbital sander. If it says 100% cotton, burn test to be sure. If it is foam, make sure there is NO dirt whatsoever that comes in contact with your paint. A grain of sand turns into a very abrasive medium if it gets between the foam and your finish.
Good luck and let us know how it works....Lee |
#6
|
||||
|
||||
I've seen wool, terry cloth, and foam bonnets for orbitals. Which is best for what purpose?
|
#7
|
|||
|
|||
Robert,
I prefer 100% cotton terry. But as long as it is 100% natural (and free of debris) you should be allright. Every one of those will have its die hards. I just like terry for ease of use, durability, cost vs sheep/wool, and I've never had a complaint with the results. Hope this helps....Lee |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
want to remove swirl marks... | hedpe | Detailing and Interior | 14 | 06-26-2002 02:55 AM |
Swirl Marks | gpvs | Detailing and Interior | 12 | 01-18-2001 12:43 PM |
Swirl Marks | 420SEL | Detailing and Interior | 1 | 08-02-2000 03:54 PM |
What do swirl marks look like? | taison | Detailing and Interior | 2 | 03-28-2000 06:19 PM |
Getting rid of swirl marks | PThiringer | Detailing and Interior | 8 | 04-22-1999 03:43 PM |