|
|
|
#1
|
|||
|
|||
Over here on Long Island N.Y, its about on average 40 degrees. Is it too cold to wax? The cold does not bother me (hehe I go fishing all year round and love the cold) however can it harm the wax.? Thanks in Advance.
__________________
"Damn the torpedos, four bells full speed ahead" -Admiral Farragut -1987 300E Smoke Silver -1997 S320 Black on Black -Soon To be E55 AMG -27 foot Grady White Offshore Sportfish. |
#2
|
|||
|
|||
I'd think that temperatures less than about 40 or 50 degrees would present some problems for a car detailer. Car washing becomes a chore, because the water temperature is going to be below the ambient air temperature, and the evaporation of water will drop the paint temperature several more degrees below that. Then drying becomes a chore, because then water starts to become "persistent," and waxing becomes a chore because the wax takes forever to bond. I love fall and winter, but I hate washing/waxing during this time of year.
If you're going to wax your car, try to find a heated garage. I've read that the optimal temperature for waxing is when the paint is around 70 degrees or so. have fun! anthony |
#3
|
|||
|
|||
Yes, its too cold.
If you really really want to wax anyway. Try to do it inside a garage with a heater that can raise the temp to about 50. Make sure you allow enough drying time. At that temp, I would guess 30 minutes, it really depends on what your using, humidity, etc. |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
wax life extension by foam wax? | ktlimq | Detailing and Interior | 3 | 05-08-2004 06:15 AM |
cold weather noises ??? | MarkM | Diesel Discussion | 5 | 01-16-2004 11:25 AM |
cold start hell | GDJ | Tech Help | 0 | 01-08-2004 07:05 PM |
E300D Cold Start Troubles | Jerzeeshor | Tech Help | 7 | 12-21-2003 06:06 PM |