PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Detailing and Interior (http://www.peachparts.com/shopforum/detailing-interior/)
-   -   Windshield chip. (http://www.peachparts.com/shopforum/detailing-interior/122576-windshield-chip.html)

420benz 05-05-2005 07:46 PM

Windshield chip.
 
Just got a chip on my one year old windshield.Can this be removed?

pberku 05-05-2005 11:37 PM

Just had mine fixed about 1 month ago. From what I now know, it can be fixed so that the repair is ALMOST invisible, provided that the chip is small enough, deep enough, did not form a "Star", is relatively uniform at the edges, and is not a crack. It should also not be in your direct line of site.

I had 3 chips, they fixed 2 of them, the 3rd one was too small to be fixed. They said that they can probably just polish the glass, and make it disappear, but I didn't bother.

The repair to the other 2 was so good that by now I can't even tell were they were. The point is, if you don't fix it, it may turn into a crack, and then its windshield replacement time.

My insurance picked up the cost of the repair. It did not affect my insurance rates at all. Just make sure you go to a place that knows what they are doing. It takes about 30 Minutes from start too finish.

Phil

unkl300d 05-06-2005 12:43 AM

confirmed
 
Ditto experience on the W126.

420benz 05-06-2005 04:28 PM

That will be my biggest problem.[finding someone that knows what they are doing]

TX76513 05-06-2005 04:37 PM

Quote:

Originally Posted by 420 benz
That will be my biggest problem.[finding someone that knows what they are doing]

Do it yourself - it's a piece of cake once you have done one. Stars, cracks, chips - no rocket science and cheap $7.

pberku 05-06-2005 04:44 PM

Quote:

Originally Posted by TX76513
Do it yourself - it's a piece of cake once you have done one. Stars, cracks, chips - no rocket science and cheap $7.

This is NOT a DIY job. You need specialized equipment to do it properly.

If you don't know where to go, call your insurance company. They should be in a good position to recommend someone knowledgeable.

Sorry I can't direct you somewhere. I am in Canada

Phil

TX76513 05-06-2005 04:48 PM

Quote:

Originally Posted by pberku
This is NOT a DIY job. You need specialized equipment to do it properly.

If you don't know where to go, call your insurance company. They should be in a good position to recommend someone knowledgeable.

Sorry I can't direct you somewhere. I am in Canada

Phil

Not at all specialized, very simple process. You may have to do a couple to get the hang of it - Maybe this is against the law in Canada :confused:

pberku 05-06-2005 05:02 PM

Quote:

Originally Posted by TX76513
Not at all specialized, very simple process. You may have to do a couple to get the hang of it - Maybe this is against the law in Canada :confused:

When they did mine, they used specialized equipment to force the compound deep into the crack, They then cured it for 20 Minutes using a UV Light. I don't think that anything that you would buy off the shelf will achieve the same results.

Anyway, that's my opinion.

Phil

TX76513 05-06-2005 05:08 PM

Quote:

Originally Posted by pberku
When they did mine, they used specialized equipment to force the compound deep into the crack, They then cured it for 20 Minutes using a UV Light. I don't think that anything that you would buy off the shelf will achieve the same results.

Anyway, that's my opinion.

Phil


I cure mine for 2 hours with UV light - I park it in the driveway on a sunny day much more UV than those 12v jobs. :)


All times are GMT -4. The time now is 04:29 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website