|
|
|
#1
|
|||
|
|||
peeling clear coat
Hello, I don't post in this section often, but I have a 300sd with burgundy paint. The paint is in good condition all around except for the roof. The clear coat is coming of in big flakes. If I were to sand the rest of the clear coat, is there any way I could recoat it myself?
__________________
"spreading a trail of obnoxious where ever we go" 1981 300sd w/ 341,500 miles http://www.wecrash.com/pics/ddda_banner.gif |
#2
|
||||
|
||||
If you are speaking of a small area you could probably feather some in. A larger area would be tough. By tough I mean just taking the clear coat off without getting into the actual paint. I would suspect that this is not the original Benz (factory) paint job that is flaking off. The image below is to reference the small tollerances between clear coat and paint.
__________________
BENZ THERE DONE THAThttp://www.peachparts.com/shopforum/...c/progress.gif 15 VW Passat TDI 00 E420 98 E300 DT 97 E420 Donor Car - NEED PARTS? PM ME! 97 S500 97 E300D 86 Holden Jackaroo Turbo D 86 300SDL (o\|/o) |
#3
|
||||
|
||||
Quote:
hey hey we are in the same spot.. fi you havent seen pics of my car .. the clear on top is like gone with some spots of white dust stuff |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|