hi, I'm a new forumer
if somebody know,please tell me how to remove side moulding door W124 300E 1991, I wants to check inside area ,maybe get rusty
thanks a lot

Attached Thumbnails

 

Remove the door cladding as follows:
1) Remove the philips head screw at the lower rear edge of the door.
2) Pry the bottom edge of the cladding with a plastic wedge to release it from the series of clips securing it to the bottom of the door.
3) Once all the lower clips are free, slide the cladding towards the rear of the car and the cladding will release from the top clips which are slotted.
Note: It's likely that you will break some of the white plastic clips since they become brittle with age. Plan to buy new ones from your local MB dealer. There are several different type clips so be sure to buy the correct ones so the cladding is tight when you reinstall it.

__________________
Fred Hoelzle

thanks for your advice,I will try it soon