Does anyone have any ideas on what I should use to re-stuff the rear seat back on my '78 240d? All the horsehair has broken apart and is settled under the seat bottom. How would I access the back? From the trunk behind the divider?

Thanks!

Here's a place in California that seems to have all sorts of stuff like that.

http://www.worlduph.com/material.htm

Seat stuffing, covers, shelf fabric, and carpet.

__________________
" We have nothing to fear but the main stream media itself . . . ."- Adapted from Franklin D Roosevelt for the 21st century

OBK #55

1998 Lincoln Continental - Sold
Max 1984 300TD 285,000 miles - Sold
The Dee8gonator 1987 560SEC 196,000 miles - Sold
Orgasmatron - 2006 CLS500 90,000 miles
2002 C320 Wagon 122,000 miles
2016 AMG GTS 12,000 miles

There should be studs protuding through the rear metal panel. I believe there are four. Remove the seat lower, remove the nuts and the back pulls forward.

Use a high quality foam for automobile upholstery. Replace both the back and the seat. Check with your local upholsterer's. Is the MBTex still in good shape?

Thanks for the replies.

The TEX is in showroom condition. So, I have already removed the seat bottom using the quick release pulls on the bottom, can you please run it by me again how to remove the back?

Through the trunk.

I re-stuffed my back seat with High Density Foam I purchased at the local fabric store.

__________________
Chad
2006 Nissan Pathfinder LE
1998 Acura 3.0 CL
OBK#44
"Pleasure in the job puts perfection in the work." - Aristotle (384-322 B.C.)

SOLD
1985 300TD - Red Dragon
1986 300SDL - Coda
1991 - 300TE
1995 - E320
1985 300CD - Gladys