Taillight mod. w124.
3 Attachment(s)
I just broke one of my aftermarket taillights. so I had to replace them with some original I had lying around. Then I thought for my self, now is the chance to do what I have long wanted to do. To have all three red lights on each side as driving lights, and at the same time have a brake light. In a regular setup, this is not possible. But I made a workaround, wich maybe someone else would like that I shared? :)
I used some parts from the aftermarket lights I had, to rebuild the lightsockets. I wanted three driving lights down low on the rear light, and move the brakelight to the middle. which I thought looked the best. If you look at the picture, I have made a twin powered socket for a "double light bulb". 21W/5W. and I changed all the rest of the driving lights to 5w aswell. this means the total power drawn from the circuits shouldnt be too much, and I guess the amount of light at the rear would be close to legal? :) please look at the pictures and tell me if you like the idea. :) Cheers, Kim |
Nice. I did this same mod on my w201. looks good
|
Thanks man! Do you have pictures of your car with this mod? It would be cool if you could upload them to show others how it would look on a w201.
|
for mine, I had a blank spot for a light, so I moved my brake lights to the inner spaces by the license plates and have my driving lights just inside of the turn signal lights
|
2 Attachment(s)
Here's some more pictures.. I must say, I'm not really sure I like it :) haha.
Attachment 113980 Attachment 113981 |
All times are GMT -4. The time now is 08:44 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website