|
|
|
#1
|
||||
|
||||
W140 (300SD) odometers not working
Hi guys,
The odometers (mileage and trip) on my 93 300SD haven't worked since I got the car. I bought a set of replacement gears on Amazon and followed these instructions to replace them, but it unfortunately didn't correct the issue. They still don't do anything. I'm wondering if there's a way to test the little motor that runs the odometers. Can you just put 12v to it and see if things start turning? The odometer assembly: And the motor and one side of the gears:
__________________
Lots of diesel W126s in the past Current: 1991 Toyota 4Runner with an OM603 |
#2
|
|||
|
|||
Usually its the rod that goes thru the gears that
Gets worn smooth. Follow one of the pictorials To scuff the rod that the gears ride on. Not sure about 12v, Im not that capable |
#3
|
||||
|
||||
I had the small pinon gear spining on its shaft,I super glue gel it,10 years ago
__________________
1999 w140, quit voting to old, and to old to fight, a god damned veteran |
#4
|
||||
|
||||
oldsiners so did i .Replace a few in the past but never done the 12 volt type more involved thats not in the view to the eye. I think you need to get it repaired or replace with another one with the same number as your head unit ,ie the number on the speedo head.must be the same ..
|
Bookmarks |
|
|