PeachParts Mercedes-Benz Forum

PeachParts Mercedes-Benz Forum (http://www.peachparts.com/shopforum/)
-   Detailing and Interior (http://www.peachparts.com/shopforum/detailing-interior/)
-   -   Anyone know how to PROPERLY install a new front door seal (http://www.peachparts.com/shopforum/detailing-interior/390022-anyone-know-how-properly-install-new-front-door-seal.html)

jbach36 11-24-2017 08:02 PM

Installing a new front door seal
 
I got a new door seal for my car and yeah, it's kind of on okay, it's just not on 100% perfect.

There's the plastic trim piece that goes around the upper 1/2 of the door beside the rubber seal.

Am I supposed to put the rubber in first then the plastic part, or the other way around? Very tight fit in there. Is there some specialty tool to do this right?

Thanks,

jeff W124, 214k

jbach36 11-26-2017 11:08 PM

Ok, I found out for you!
 
Ok guys, I found out the trick to doing this, and soap and water are NOT it, not that I tried that. If you use soap and water on a water tight seal.....what do you think is going to happen??? The water's going to get TRAPPED in there and RUST your car. No thank you.

The RIGHT way to do this, as I found out, is to put the plastic piece in first, then use a rounded putty knife (ie, without sharp corners on the edges) and pry the rubber in from the inside and outside of the rubber. Then it went in real well.


All times are GMT -4. The time now is 09:24 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.0
Copyright 2024 Pelican Parts, LLC - Posts may be archived for display on the Peach Parts or Pelican Parts Website